Features

• High production tool.
• Ideal for use where 1 tool is needed per bore.
• One piece cryogenically treated tool bit ensures maximum life.
• Tool is ideally suited for CNC applications on account of 1 piece mandrel construction and short design.

Serrating / Grooving Tool - 'SGT' Series

Features

• Only light pressure required to cut precision grooves inside holes or cylinders.
• Location and depth of groove easy to adjust.
• Simple to change cutter for different groove shapes.
• Changing of bushing and cutter allows one tool to cover a range of hole diameters.
• The life of the cutter extendable by re-sharpening.

   Features

• Tool bits coated with Titanium Nitride to give 3 times the life of convertional tool bits.
• Ideal for quick facing of projecting tube ends in heat exchangers, condensers and boilers.
• One size of tool is suitable for use on multiple tube thicknesses by interchanging pilot. (TEF-375 is the exception with the tool suitable for one tube ID only).
• Each tool is supplied with a set of multiple pilots to cover all tube thicknesses.
• Tube end facers for MM sizes of tubes also available. Please enquire.

Features 

• Tool uses 3 cutting blades which can be configured for tube end facing or weld removal as a step in the removal of welded tubes from the tube sheet.
• Tool fitted with MT shank for use with standard air or electric drills.
• Cutting blades are Titanium Nitride coated to give 3 times the life of conventional cutting blades.
• Tools available for MM sizes of tubes also. Please enquire.
• Ideally suited for work on larger diameter boiler tubes.

Features

• In many condensers the inlet end of tubes are required to be seated into the sheet (not projecting). The contour is a “Bell End” or “Trumpet Mouth” of special shape.

Features

• To ‘pilot’ the tubes through the tube sheets and baffle plates during tube insertion.

   Features

• Simple, Quick and Reliable tube and joint testing. Test 7 to 8 tubes or 10 tube joints per minute.
• Interchangeable seal sets : Allows testing of tubes from 7.75 mm to 30.63 mm ID with easy to replace accessories.
• Each Tube Testing Gun weighs less than 1.3 kg and Joint Testing Gun weighs less than 1.5 kg.
• Air supply : Uses standard plant air supplies from 70 psi to 100 psi (4.7 to 6.8 bar).
• Silent during use . Ergonomic design makes testing effortless.
• Each Kit packed in easy to carry case.

Tube End Facing Machine

Features

• Power and range combined in light and portable design.
• Drive : Electric, Hydraulic or Pneumatic
• Range of Tube end facing, external or internal bevelling and weld seam machining tool bits.
• Quick interchangeability of Pilot to suit range of inside diameters.
• Modular and Ergonomic design.