AUTO STUB PULLER
|
|
|
Stub Pulling Gun |
Hydraulic Powerpack |
|
|
Features
|
|
- Designed for fast removal of ferrous and non-ferrous tubes from Condensers, Heat Exchangers, and Boilers.
- A rapid stroke allows the removal of 10 tubes a minute with little operator efforts.
- Gripping and pulling done in single operation.
- Compact and lightweight pulling gun, easy to operate inside boiler drum with 24 Volt DC control.
- Auto ejection of tube after removal.
- Remove tubes without any damage to tube sheet.
- Pneumatic version available for hazardous and explosive areas.
- Low setup time and ease of operation.
- Auto Switchover from low-pressure high flow to high-pressure low flow on load and back again when load is released.
- Interchangeable pulling gun with same power pack.
- Significant savings of time & money over conventional methods of stub removal.
- Can pull from 15.8 mm to 50.8 mm I.D. tubes.
|
|
AUTO STUB PULLER SET
Model |
Tube Size ID |
Stub Pulling Gun Model |
Hydraulic Powerpack Model |
Spring Balancer Model To Suspend Gun |
mm. |
inch |
ASP-1 |
15.8-32 |
5/8-1.1/4 |
CTP-900 |
PPP-35 / EPP-15 |
SWF-22 |
ASP-2 |
32-50.8 |
1.1/4-2 |
CTP-1100 |
PPP-35 / EPP-15 |
SWF-40 |
|
|
|
STUB PULLING GUN - SPECIFICATIONS
|
Model Number |
CTP-900 |
CTP-1100 |
Capacity / inside dia. of expanded tube (inch) |
5/8" TO 1.1/4" |
1.1/4" TO 2" |
Maximum stroke (mm.) |
75 |
120 |
Weight (kg) |
21 |
39 |
Max.Working Pressure (bar) |
700 |
700 |
Max.Pulling force (ton) |
13 |
31 |
|
|
|
HYDRAULIC POWERPACK - SPECIFICATIONS
|
Model Number |
PPP-35 |
EPP-15 |
Power |
Pneumatic |
Electric |
Motor H.P. |
3.5 |
1.5 |
Flow rate |
4.5 lpm at 0 -70 bar
1.8 lpm at 70 - 700 bar
|
3.5 lpm at 0 - 70 bar
0.45 lpm at 70 - 700 bar
|
Tank capacity (liters) |
10 |
10 |
Weight including oil (kg) |
40 |
52 |
|
Note : 5 mtr. long Remote Control and 5 mtr. long Hose set are supplied with Powerpack.
|
|